Looking for Golf R mods to improve the performance of your vehicle? | A deep-dive into Software and hardware upgrades you should consider.

There are a few common software and hardware upgrades you should be aware of that can seriously enhance your vehicle’s performance capabilities. This blog explains 3 software upgrades that you can make to your Golf R varying from purely software enhancements to the most extreme of hardware installations to extract maximum power from your vehicle.

Here are the top #3 Golf R mods that will improve your vehicle’s performance:

1. Stage 1 ECU Remapping | Software only

2. Stage 2 ECU Remapping | Software and hardware upgrades

3. Stage 3 ECU remapping | Software, hardware and Turbo charger upgrades

Let’s start with a Stage 1 ECU remap to ease you into the world of Golf R mods.

A stage 1 remap is a software upgrade that can be installed through your Golf R’s ECU (Electronics control unit). A simple stage 1 software upgrade can improve your vehicles:

A stage 1 ECU remap is one of the most popular golf r mods as it offers a significant power increase without requiring any hardware modifications making it both affordable and highly effective. A stage 1 remap with take a 2016 Golf R from 305 BHP to 355 BHP and increasing torque from 364 Nm to 457, a whopping increase of +93.6 Nm.

For those Golf R owners looking to vastly improve vehicle performance and build a track-ready, pocket rocket, a stage 2 ECU remap could be the option for you.

A stage 2 ECU remap pushes the engine’s performance past stage 1 performance parameters and past the limits of stock hardware, therefore stage 2 remapping requires hardware upgrades to the exhaust system to improve the flow of high-pressure exhaust gasses as well as the Air intake, turbo intake elbow, intercooler and transmission control unit tuning, also known as gearbox tuning.

The image below shows both the BHP and Torque you can expect from one of the most sought after Golf R mods , the stage 2 remap.

Let’s look into common Golf R mods required for stage 2 remap:

So, what are the most common Golf R mods that you can perform to your exhaust system to accommodate a stage 2 remap?

An aftermarket cat-back exhaust system replaces the stock muffler and piping from the catalytic converter back. The cat-back exhaust system is made up of many parts. Some examples include the muffler and tailpipe or tips, which are both located at the very back end of the vehicle.

This is one of the most popular Golf R mods to the exhaust because it’s relatively easy to install and offers a moderate power increase due to a reduction in internal drag as exhaust fumes exit the vehicle faster after combustion.

A downpipe replaces the section of piping between the turbocharger and the catalytic converter. It is a more involved mod than a cat-back exhaust and often requires engine tuning to work properly, but it can offer a significant power increase.

An aftermarket downpipe is often larger in diameter than the stock downpipe and is designed to improve exhaust flow.

In the United Kingdom, the rules for emission control and catalytic converters are set by the Driver and Vehicle Licensing Agency (DVLA), not the police. As a result, there are no rules or regulations that outlaw decat pipes. Decat pipes are often used to improve the performance of a vehicle, as they can help to increase power and torque.

And finally, one of the most crucial aftermarket Golf R mods to improve the performance of your vehicle..

2.2 Gearbox Tuning (Transmission control unit) Remap

Another of the complementary Golf R mods to stage 2 ECU remapping. You can expect the following benefits from having this TCU remap modification:

Air intake upgrades are one of the most popular and effective Golf R mods to increase the performance of your vehicle. By installing a high-flow air intake system you can benefit from increased power and torque allowing your engine to breathe more freely. In addition, it can also improve fuel economy and throttle response.

There are many different types of air intake upgrades available on the market, but they all serve the same purpose: to allow more air into the engine.

When stage 2 remapping your Golf R, you are extering more pressure on the engine, creatng more heat. You will need an intercooler that can handle the increased heat. Front mount units are typically required at higher tuning levels due to their direct connection with timing and boost pressure from an ECU remap which results in greater power output but also creates issues in hardware reloading times because of this added strain on components such as radiators or water pumps.

Upgrading the turbocharger is one of the more involved Golf R mods that is carried out when performing a stage 2 remap. Offering a huge increase in BHP. A turbo upgrade is however one of the more expensive and involved mods on this list, but it can also yield some serious gains in power and performance.

While there are many different types and sizes of turbochargers available on the market, it is important to choose one that is compatible with your engine. A turbocharger that is too big for your engine can result in poor performance and reliability issues. We recommend Littco, TTE and Turbo technics.

A Golf R stage 3 tune will require an upgraded turbo intake elbow.

The OEM Golf R’s airbox hose has a diameter that reduces throughout, from the front of your car to just below where it meets with another component. This causes reduced flow and thus performance loss because there isn’t enough oxygen reaching our engine’s turbines for maximum power output! The standard OEM intake elbow just isn’t as efficient as it should be.. By installing an aftermarket, wide bore turbo intake elbow you can increase the efficiency of airflow, gaining 10bhp and 15 ft/lb torque. One of the only Golf R mods that should be made to even without high end tuning to provide the vehicle the intake efficiency it should have come from factory with.

In conclusion , the top #3 Golf R mods to increase the performance of your Golf R:

1. Stage 1 ECU Remapping | Software only

2. Stage 2 ECU Remapping | Software and hardware upgrades

3. Stage 3 ECU remapping | Software, hardware and Turbo charger upgrades

Each of these mods offers increased power and performance, but it is important to note that as the demand for hardware increases, so does the cost of your Golf R build.

If any of the Golf R mods listed in this blog are of interest to you. You can reach out to our friendly team at Mapro tuning to book in and improve the performance of your Golf R | info@maprotuning.co.uk | 02392170530

The post Top #3 Golf R Mods appeared first on Mapro Tuning.